Published: January 4, 2021
favorite0 forum0 poll24
By: Arturo Murillo, California State Polytechnic University-Pomona
Hashtags: #CalPoly #calpolypomna #Design #Electrical #Engineering #Project #Teamwork
This project illustrates a hardware chasing LEDs with the following technical specifications. The number displayed on the seven-segment display must be in decimal, the slide switches 0 to 7 as the delay input (J15 to R13), slide switch 15 as a stop signal (V10), and BTND as the reset button. Also, the longest delay at 255 should be around 500 mS and the shortest delay at 000 should be around 50 mS.